P/N: TV10 0090 - 3G-SDI Premium transmission interface for LVDS camera bloc zoom
Beschreibung
The 3G-SDI Premium Twiga module allows to transmit and display simultaneously full HD video signal and analog SD from any LVDS OEM zoom bloc cameras.
The PAL / NTSC analog video output is achieved by FPGA conversion of the digital signal of the camera.
The Twiga 3G-SDI Premium module is built around a powerful FPGA dedicated to real-time image processing. On request, additional functions such as additions of measurements, reticles, contrast enhancement, scaling, digital zoom on PAL output, OSD, can be implemented.
Kontakt
Technische Daten
Digital video output 3G-SDI – HD-SDI Connector BNC (SMB, MCX or no connector in option) Video output resolution up to 1080p60 Analog video output formats CVBS, YPbPr, Y/C (according to board internal registers configuration) Video format configuration DIP switches and/or VISCA software via Sony FCB control software Camera control settings VISCA - RS232 / TTL configurable with DIP Switch Power supply 7 to 12 VDC, 6W Operating temperature 0°C to 60°C Storage temperature -20°C to 60°C Regulation EMC FCC part 15, PCB : UL94V0 Dimensions (mm) 48 (H) x 45 (W) x 13 (D) Weight (g) 15 DOWNLOAD
3G-HD-SDI-Premium-Interface-board_Technical-manual Dokumentation 3G-HD-SDI-Premium-Interface-board_Product-brief Dokumentation
Beschreibung
3G-SDI output standard
Serial digital interface (SDI) is a family of digital video interfaces standardized by SMPTE (The Society of Motion Picture and Television Engineers). 3G-SDI, is the most recent interface. Consisting of a single 2.970 Gbit/s serial link, It is standardized in SMPTE 424M.This standard is used for transmission of uncompressed, unencrypted digital video signal (optionally including embedded audio and/or time code) within television facilities
Optional Stereo audio input
Two audio lines or microphone input are available in option. Line input : ( 47KOms impedance): 0dB level for a 18dBFs SDI signal. Variable gain from 97dB to +30dB Microphone input: Bias voltage can be adjusted until 2,3V for Electret microphones, max gain : +63dB Numerous audio functions can be managed by RS232 software with a VISCA ''like'' protocol. Stereo/ Mono / left / right ; two lines mixing.
Complete SONY FCB HD range compatibitity
The interface board automaticaly recognizes the SONY FCB Model and adapts its image processing to the SONY FCB SE 600, FCB EH range ( 6500,6300, 3400,3300,3150), to the FCB-EV7500 and FCB-EV7100.
Aussergewöhnliche Signalqualität
By adding a dedicated circuit for correction and stabilization of the Sony camera output clock, the interface board provides a high quality HDSDI signal. Characterized by a 'jitter' of less than 0.5 IU, lower than 300 ps rising ans falling edges, the 3Gb/s HD signal can be transported coaxial cables over 100 meters of High quality coxial cable.
